Automatic Nail Making Machine

Home » Products » Automatic Nail Making Machine

Apart from the general steel nails, our newly developed high speed automatic nail making machine with low noise generation also can manufacture special shaped nails such as linoleum nails, roofing nails, double cap nails, U-shaped nails, twist nails, concrete nails, etc. This equipment consists of lubricating system and driving system. The driving system covers wire feeding, wire clamping, cutting, and stamping.

Z94-1C Automatic Nail Making Machine
Z94-1C automatic nail making machine can produce 450 pieces of nails per minute. All those nails come with the length ranging from 9mm to 25mm.

Parameters
Model Z94-1C Automatic Nail Making Machine
Max. Diameter of Nail (mm) 1.6
Min. Diameter of Nail (mm) 0.9
Max. Length of Nail (mm) 25
Min. Length of Nail (mm) 9
Designed Output (pcs/min) 450
Motor Power (Kw) 1.5
Weight (approx) (kg) 560
Overall Dimensions (mm) 1440x1040x1270

Z94-2C Automatic Nail Making Machine
Z94-2C automatic nail making machine is used to manufacture 16mm to 50mm long nails. Its production rate is 350 pieces per minute.

Parameters
Model Z94-2C Automatic Nail Making Machine
Max. Diameter of Nail (mm) 2.8
Min. Diameter of Nail (mm) 1.2
Max. Length of Nail (mm) 50
Min. Length of Nail (mm) 16
Designed Output (pcs /min) 350
Motor Power (kw) 2.2
Weight (approx) (kg) 1200
Overall Dimensions (mm) 1645x1215x1345

Z94-3C Automatic Nail Making Machine
Z94-3C automatic nail making machine comes with the production rate up to 320 pieces per minute. It is applicable for the nails with the length from 30mm to 75mm.

Parameters
Model Z94-3C Automatic Nail Making Machine
Max. Diameter of Nail (mm) 3.4
Min. Diameter of Nail (mm) 1.8
Max. Length of Nail (mm) 75
Min. Length of Nail (mm) 30
Designed Output (pcs/min) 320
Motor Power (kw) 3
Weight(approx) (kg) 1400
Overall Dimensions (mm) 1800x1260x1460

Z94-4C Automatic Nail Making Machine
Z94-4C automatic nail making machine is specially designed for making the nails with the length from 2inch to 4inch. The production output is 280 pieces per minute.

Parameters
Model Z94-4C Automatic Nail Making Machine
Max. Diameter of Nail (mm) 4.5
Min. Diameter of Nail (mm) 2.8
Max. Length of Nail (mm) 100
Min. Length of Nail (mm) 50
Designed Output ( pcs / min) 280
Motor Power (kw) 4
Weight (approx) (kg) 2000
Overall Dimensions (mm) 2000x1560x1450

Z94-5.5C Automatic Nail Making Machine
Z94-5.5C automatic nail making machine whose production rate is 180 pieces per minute is designed for making the nails of 80mm to 150mm long.

Parameters
Model Z94-5.5C Automatic Nail Making Machine
Max. Diameter of Nail (mm) 5.5
Min. Diameter of Nail (mm) 3.7
Max. Length of Nail (mm) 150
Min. Length of Nail (mm) 80
Designed Output (pcs /min) 180
Motor Power (kw) 5.5
Weight(approx) (kg) 2500
Overall Dimensions (mm) 2380x1580x1660

Z94-6.5C Automatic Nail Making Machine
Z94-6.5C automatic nail making machine designed for manufacturing the 100mm to 200mm long nails can produce 160 pieces per minute.

Parameters
Model Z94-6.5C Automatic Nail Making Machine
Max. Diameter of Nail (mm) 6.5
Min. Diameter of Nail (mm) 4.5
Max. Length of Nail (mm) 200
Min. Length of Nail (mm) 100
Designed Output (pcs /min) 160
Motor Power (kw) 11
Weight(approx) (kg) 5000
Overall dimensions (mm) 3200x2200x2200

In the nail making process, our equipment has the auxiliary machines like wire reel, nail cutter grinder, and nail polishing machine. The main wearing parts are nail mold, nail knife, and punch pin.

Production Principle
This equipment covers one main crank and two side shafts. Due to the special bearing design, it is smoother in operation as compared to the traditional nail making machine. The main axle is directly driven by the motor. In addition, the two side shafts separately used to control the nail cutter part and nail mold part are pulled via four bevel gear.

Production Process
The wire on the wire wheel will be fed to the working center through the wire roller of the nail making machine, and then the nail head is formed via the stamping of the punch pin after the nail mold clamps the wire tightly. After loosened by the nail mold, the wire will be driven to cutting center through the side shaft. Later, the nail will be cut into the set length. Finally, the finished nails will be automatically eject through the ejector.

Parameters
Model Z94-6.5C Z94-5.5C Z94-4C Z94-3C Z94-2C Z94-1C
Max. Diameter of Nail (mm) 6.5 5.5 4.5 3.4 2.8 1.6
Min. Diameter of Nail (mm) 4.5 3.7 2.8 1.8 1.2 0.9
Max. Length of Nail (mm) 200 150 100 80 50 25
Min. Length of Nail (mm) 100 80 50 30 16 9
Designed Output (pcs / min) 160 200 260 320 350 450
Motor Power (Kw) 11 5.5 4 3 2.2 1.5
Weight (Approx) (Kg) 5000 2500 2000 1400 1200 560
Overall Dimensions (mm) 3200x2200
x2200
2800x1800
x1800
2200x1600
x1650
2000x1400
x1400
1700x1300
x1400
1500x1300
x1200
Wire Reel
It is used for the wire coil laying
Nail Cutter Grinder
It is used for grinding the nail knife by the grinding wheel.

Nail Polishing Machine
This machine is used for polishing the nails, caps, etc. After put into the roller, the finished nail will be free from sharp edges and greasy dirt after having been rolled together with the sawdust for about 1 hour. Then, use the sieve plate to separate the sawdust and nails. The nail could become brighter and anti-rust after polishing.

Parameters
Type SD-400 SD-600 SD-1000 SD-2000
Capacity 400kg 600kg 1000kg 2000kg
Power of Motor 3kw 4kw 7.5kw 11kw
Overall Size 1640x90
x1000
1960*1070
*1400
2000x1500
x1400
2500x1500
x1600
Sample
Automatic Nail Making Machine Automatic Nail Making Machine

Maintenance
1) Ensure the cleanness of the automatic nail making machine, and the nail mold should be frequently washed. Do not use the rusty wire for nail making.
2) Be sure the well lubrication of the nail making machine before starting. Especially for the new nail making machine, frequently lubricate the machine parts with oil, grease.
3) Regularly use the nail cutter grinder to grind the nail knife.
4) When operating the machine, you should always pay attention to the unusual noise as well as the temperature changes of the frictional parts.

Wuxi Shenda is a professional automatic nail making machine manufacturer and supplier in China. We also offer high speed thread rolling machine, rivet making machine, water tank type wire drawing machine, well type annealing furnace, and much more.

Related Names
Steel Nail Machine | Iron Nail Maker | Equipment for Producing Nail | Rebar Recycling Equipment
Feedback Form
Other Product